Machine Capacity: 6000BPH-48000BPH
| 1.设备详细介绍：Equipment details instruction |
| 1.1机械部分：Equipment composition |
| A:主机(关键器件) Host of machine (key components) |
| 威纶通或昆仑通态大尺寸彩色触摸屏，融合了机器的参数、生产情况、故障报警等相关的信息，中英文操作界面，切换极其方便，也可以按需设计小语种操作界面。
WEINVIEW or MCGS large-size color touch screen, the integration of machine parameters, production conditions, fault alarms and other related information, Chinese and English operation interface, switching is extremely convenient, you can also design a small language operation interface on demand. |
| 运动控制系统采用德国倍福或日本基恩士 The motion control system adopts the German Beckhoff or KEYANCE ABB or DANFOSS变频器 ABB or DANFOSS converter |
| 德国莱默尔E+L纠偏器 เยอรมนี Lemmer E L rectifier |
| B:机械部分： Mechanical parts |
| 输送机构：本贴标机不带输送动力, 采用灌装或本身链道的输送线的动力，变频器调速。 Conveyor sector:The labeling machine without conveyor power, adopt filling machine’s power or exit conveyor’s own power ,converter adjust the speed. 输送线宽度按现有生产线制作，本机不提供输送链板。 Width of conveyor will manufacturing according to exist conveyor line ,the labeling machine do not provide conveyor chains . |
| 主轴支架机构：采用2单作用气缸和立柱构成三角形稳定状态。 Main Shaft support mechanism: Using 2 single-acting cylinders and columns to form a triangular stable state. 压瓶头升降机构：采用电机控制升降，定位稳定精确。
|
| 小机台前后上下调整系统 Front and back, up and down adjustment system of labeling system. 送标机构： 高速伺服OPP标签膜送标系统 Labels delivery device: High speed servo OPP labels film delivery system. 供胶系统： 博尚专用热熔胶供胶系统，保证上胶的准确性和均匀性。 Glue feeding system: boshang delicate hot melt glue feeding system to ensure the accuracy and uniformity of glue feeding. |
| 贴标机的驱动动力采用德国SEW品牌电机，品质可靠耐用.
Driver of labeling machine is made of Germany SEW brand motor, with reliable and durable quality. |
| 进瓶机构：专用进瓶螺杆，安装扭力限制器,螺杆和护瓶推板均为快拆结构，且都有定位，一次调整完成，后期无需调整 ，更换模具简单快捷。
Bottle feeding mechanism: dedicated bottle feeding screw, installation of Torque limiter ,screw and bottle protector push board are quick dis–assembly structure, and both have positioning, once adjustment is completed, no adjustment in future, quick and easy to change. |
| 进出瓶星轮： 与主转盘齿轮连接，负责进瓶螺杆与主转盘之间的过渡，安装扭力限制器，快拆结构，且都有定位，一次调整完成，后期无需调整 ，更换模具简单快捷。 In and out of the bottle star wheel: with the main rotary wheel gear connection, responsible for the transition between the screw into the bottle and the main rotary table, installation of Torque limiter, quick dis–assembly structure, and all have positioning, one adjustment is completed, no later adjustment, simple and quick mold replacement. |
| 2.贴标工作原理：Labeling Principle |
| 本热熔胶OPP贴标机为回转式、连续运行贴标的新型贴标机; 设备能够自动调节容器的进、出传动情况；由输送带传送过来的容器被分瓶螺杆按照星轮的间距分开一定的距离，然后进瓶星轮将容器传送到容器转台上，由压瓶机构和容器的模具座将容器固定好后，容器开始按一定的速度自转，进行定位贴标。 The hot melt adhesive OPP labeling machine is a new type of rotating and continuous operation labeling machine; Equipment can automatically adjust the container in and out of the transmission; The container transferred by the conveyor belt is separated by a certain distance by the bottle dividing screw according to the distance of the star wheels. Then, the imported star wheel will transfer the container to the container turntable. After the container is fixed by the bottle pressing mechanism and the mold base of the container, the container starts to rotate at a certain speed. Mechanical predetermined position during product rotation; And according to the trajectory of the mechanism for positioning labeling. |
| 当容器到达电眼检测位置时，电脑主机控制标签送标系统进行送标，当完成一个送标动作后，高速切刀把一张标签切断；由于采用伺服马达，保证高速送标和切标的准确性及稳定性。 When the container arrives at the position detected by the electric eye, the label delivery system is controlled by the computer host to deliver the label. After completing a label delivery action, the high-speed cutter cuts off a label. Due to the use of servo motor, to ensure the accuracy and stability of high speed delivery and cutting labels. |
| 被切断的标签送进上胶系统；在这部分，系统对标签首尾边缘两部分进行涂胶，这种涂胶方式使得热熔胶的消耗量最低。 The cutting label is sent to the gluing system; In this part, the system applies glue to both ends of the label, which makes the consumption of hot melt glue the lowest. |
| 已涂胶的标签当被转到贴标位置时，标签能够准确、有效地粘到容器上。由于在标签的传送过程中，容器处于转动状态下，因此，标签能够平稳地、紧密地粘贴到容器上。在施胶尾端的胶条能够形成一个良好的标签搭接封口，完成了一个贴标过程。
When the coated label is transferred to the labeling position, the label can be accurately and effectively glued to the container. Since the container is in a rotational state during the transfer of the label, the label can be attached to the container smoothly and tightly. The strip at the end of the label can form a good lapping seal of the label, completing a labeling process. |
| 3.设备安全防护功能部分：Equipment safety protection function |
| 电源监控：当供电电源出现过压,欠压,缺相,相位错时切断主电路并报警,防止电器元件损坏。
Power Supply Monitoring: When the power supply appears over-voltage, under-voltage, missing phase, phase fault, cut off the main circuit and alarm, to prevent electrical components damage. |
| 安全防护：当防护门打开时设备禁止运行启动，紧急状态下可按下急停开关,防止造成人员伤害。 Safety protection: The equipment is forbidden to run and start when the protective door is opened. The emergency stop switch can be pressed to prevent injury to people. |
| 标签状态：当标签用完时降速待机并报警提示，提醒更换标签。当标签的色标与图纸相似时.可以避开色标以外的图案，检测色标. Label Status: When the label is used up, slow down and wait for the alarm prompt, remind to change the label. When the color mark is similar with images on the label,it can keep away from other images. |
| 胶液检测：当胶液温度未达融化值时设备禁止启动，防止设备损坏,当胶液温度超过上限,探头开路,加热器断路时停止加热并停机报警,当胶箱液位低,胶液即将用完时报警提示并延时降速待机。 Glue Detection: When the glue temperature does not reach the melting value, the equipment is forbidden to start, to prevent the damage of the equipment, when the glue temperature exceeds the upper limit, the probe opens the circuit, the heater breaks the circuit, stop heating and stop and alarm, when the glue box liquid level is low, the glue is about to run out when the alarm prompt and delay to slow down standby. |
| 漏贴报警/标签传递失败：当出现漏贴标时设备降速停机报警,防止切标鼓粘胶,降低停机时间。 Warning of missing label/label delivery failed: When there is a missing label, the device slows down to stop & alarm, to prevent cutting the label drum glue, reduce the downtime. |
| 物料控制：当进出瓶端瓶子数量变化时，贴标机自动调速。 Material Control: when bottles quantity change at in and out ,labeling machine will be adjusting speed by itself. |
| 器件监控：当伺服驱动,变频驱动发生故障,控制电源出现短路时设备停机报警。
Components Monitoring: When the servo drive, frequency conversion drive failure, control power short circuit,the device shutdown alarm. |
| 气压检测：当气压达不到设备生产要求时，设备实行停机保护，防止不良品的产生。 Air Pressure Detection: When the air pressure can not meet the production requirements of equipment, equipment shutdown protection to prevent the production of defective products |
| 瓶子堵塞：当标站,进料螺杆,进出瓶星轮发生堵塞卡顿故障时停机报警。
bottles jamming: When the labeling head, feed screw, in and out of the bottle star wheel clogging occurs failure machine shutdown and alarm. |
4.设备配置表：Equipment configuration List
| 名称 Name of Goods |
品牌 Brand |
品牌所属国家 Brand County belong to |
| 人机界面 HMI |
昆仑通态 或 威纶通
MCGS or WEINVIEW |
中国 จีน |
| 运动控制系统 Motion Control system |
倍福 或 基恩士 Beckhoff or KEYANCE |
德国 或 日本 Germany or Japan |
| 送标伺服电机 labels feeding servo motor |
高创 或 安川 SERVOTRONIX or YASKAWA |
以色列 或 日本 อิสราเอล or Japan |
| 放卷伺服电机 Unwinding servo motor |
高创 或 安川 SERVOTRONIX or YASKAWA |
以色列 或 日本 อิสราเอล or Japan |
| 张力传感器
Tension sensor |
科瑞 CONTROLWAY |
德国
GERMANY |
| 传感器(标签检测)
sensor (label detection) |
SICK | 德国 GERMANY |
| 反射电眼(标盘检测)
reflection sensor(labels plate detection) |
SICK | 德国 GERMANY |
| 漏贴标检测 label missing detection |
KEYANCE | 日本 JAPAN |
| 偏振反射电眼(进出料检测)
Polarized reflection sensor (in and out material detection) |
LUZUE | 德国 GERMANY |
| 变频器 converter |
ABB or DANFOSS | 瑞士或丹麦
สวิตเซอร์แลนด์ Or Denmark |
| 中间继电器 Intermediate relay |
欧姆龙
OMRON |
日本 JAPAN |
| 接触器 Contactor |
伊顿 ETON |
美国 USA |
| 断路器 Circuit Breaker |
西门子 SIEMENS |
德国 GERMANY |
| 纠偏导正系统 Deviation correction system |
E+L | 德国
GERMANY |
| 电源监控保护继电器 Power Protective relay |
佳乐
CARLO GAVAZZI |
瑞士
สวิตเซอร์แลนด์ |
| 安全继电器+安全开关 Safety relay +safety switch |
皮尔兹
PILTZ |
德国
GERMANY |
| 智能电源分配保护器 Intelligent power distribution protector |
穆尔
MOULT |
德国
GERMANY |
| 开关电源
switch power |
明纬
MINGWEI |
中国台湾
TAIWAN |
| 急停开关 EMG Switch |
施耐德 Schneider |
法国
FRANCH |
| 压力开关
Pressure switch |
SMC | 日本
JAPAN |
| 负荷开关/按钮/急停开关 Load Switch / Button / emergency stop switch |
施耐德
Schneider |
法国
FRANCH |
| 手持机箱
hand held machine box |
美卡诺
Mekano |
德国
GERMANY |
| 编码器 encoder |
禹衡 Yuheng |
中国 จีน |
| 主电机
Main motor |
SEW | 德国
GERMANY |
| 主要轴承
Main gears |
NSK | 日本
JAPAN |
